Get ready to add some festive flair to your fireplace with these charming ballet slipper and paw stockings! No sewing machine is required—just grab your supplies, download the patterns, and follow the instructions to create your own holiday decorations.

Download the Patterns

Click here to download ballet slipper stocking pattern pages.

Click here to download the paw slipper pattern pages.

Ballet Slipper Stocking

Supplies Needed

• Ballet slipper pattern pieces

• Pins

• Scissors

• White felt fabric for the stocking: 4 pieces (18” x 12”)

• Pink felt fabric for the bottom of the stocking: 2 pieces (12” x 5”)

• Large-eye sewing needle

• Pink embroidery floss

• White embroidery floss

• 7/8” thick pink ribbon (approximately 3 yards)

• Hot glue gun and glue sticks

Instructions

1. Prepare the Pattern Pieces: Cut out the pattern pieces from the downloaded pages. The stocking and bottom patterns will print on multiple pages, so be sure to tape them together, using the letters as a guide and aligning them along the dashed lines.

2. Cut the Felt: Pin the stocking pattern to one layer of white felt and cut around it. Repeat this process three more times to create a total of four white stockings. For the pink bottoms, pin the corresponding pattern to a layer of pink felt and cut around it, repeating to create two pink bottoms.

3. Assemble the Stockings: Stack the four white stocking pieces together. Position the pink bottoms at the base of the front and back of the white stockings. Pin them in place at various points along the edges.

4. Whipstitch the Bottoms: Using pink embroidery floss, whipstitch along the edge of the pink bottoms, sewing through the pink felt and 1-2 layers of the white felt.

5. Finish the Edges: With white embroidery floss, whipstitch along the outer edge of the white felt on both sides. When stitching the top of the stocking, only sew together two layers on both sides to keep the top open.

6. Add the Ribbon: Cut strips of ribbon and lay them across the stocking as desired. Use hot glue to secure the edges, and trim any excess ribbon hanging over the edge of the stocking.

Paw Stocking

Supplies Needed

• Paw stocking pattern pieces

• Pins

• Scissors

• Felt fabric: 4 pieces (18” x 4”)

• Scraps of felt fabric for the paw pad and toes

• Large-eye sewing needle

• Matching embroidery floss

• Hot glue gun and glue sticks

Instructions

1. Cut the Felt: Pin the paw stocking pattern to a single layer of felt fabric and cut one out. Repeat this process three more times to create four layers in total.

2. Stack the Layers: Stack all four layers together and pin them in place.

3. Whipstitch the Stocking: Using embroidery floss and a needle, whipstitch along the side and bottom of the stocking through all four layers. For the top of the stocking, only whipstitch two layers on both sides to ensure it remains open.

4. Add Paw Pads and Toes: Pin the paw pad and toe patterns to your felt scraps, cutting one of each shape. Hot glue these pieces to the bottom of the stocking to complete your design.

Now you have two adorable stockings ready to hang by the fireplace! Happy crafting!